Hook
More breakout videos from this creator.
this is the right way to use door locks but 99 percent of people are doing it wrong 1. use the lock ring to heat and make a hole in the bottle cap then insert the bottle cap onto the door bolt after that lock the door and screw the bottle onto it this can effectively prevent the lock from getting wet rusting and corroding 2. install a hook on the top of the door frame and another one on the door panel then tie a rope between them hang it on the other hook and attach a bottle to the end of the rope this way the door can close automatically 3. when the door lock is broken Mark the spot on a piece of wood and cut out a notch place it on the door handle and the door can be secured 4. Grandma threaded a wrench through a metal ring and then locked it with a padlock this way she didn't have to worry about thieves opening it it's simple and practical 5. If a key breaks inside the lock and you can't get it out heat a plastic syringe until it softens quickly press it onto the keyhole wait for it to cool then pull the plunger to remove the broken key 6. push a towel into the gap of the door roll up both sides and secure it with rubber bands this can block the gap under the door and reduce the amount of light coming through 7. if you can't find the key insert one large wrench and one small wrench into the lock apply force to bend them and the lock will open 8. don't throw away empty dish soap bottles squeeze some hot glue onto the bottle cap and it becomes a useful door bumper have you Learned these practical life hacks