Post by @gridlinktrading0

These are Aurora AGi20P 20 kW whole-home standby (or continuous-duty capable) diesel generators. Built tough, Canadian-assembled, powered by a legendary Perkins engine. In the video they’re prepping two units with matching 200-amp automatic transfer switches ready to crate and ship. Core Specs • Rated Power: 20 kW standby (can handle full-time/prime power use) • Voltage: 120/240 V single-phase • Amps: ~160 A @ 120 V / ~80 A @ 240 V (some listings show slight variations around 83 A @ 240 V) • Frequency: 60 Hz • Engine Speed: 1800 RPM • Engine: Perkins 404D-22G – 4-cylinder, 2.216 L (135.2 in³), naturally aspirated, indirect injection, water-cooled diesel • Standby electrical output ≈ 21.3 kWe • Prime ≈ 19.2 kWe • Compression ratio 23.3:1 • Glow plugs for cold starts • Expected engine life 20,000+ hours • Oil change interval: up to 500 hours • Alternator: Mecc Alte brushless (NPE32 L4 C or similar) with Automatic Voltage Regulation (AVR) • Voltage regulation ±1% • Overload capability up to 300% for 20 seconds • Clean, stable power safe for sensitive electronics • Controller: DynaGen TG350 (military-spec grade) • Auto-start, exercise timer, full protection & monitoring • Compatible with all two-wire start systems / automatic transfer switches • Transfer Switch: 200-amp automatic transfer switches (shown in the boxes on top of the units) Fuel, Noise & Maintenance • Fuel: Diesel • Typical consumption (approx.): • 50% load ≈ 0.82 gal/hr (3.1 L/hr) • 75% load ≈ 1.13 gal/hr (4.3 L/hr) • Full load around 1.6–1.8 gal/hr depending on conditions • Standard tank options: 12-gallon (≈45 L) base; larger 50–100+ gallon tanks available • Sound level: <70 dB @ 23 ft (quiet for a diesel this size; weather enclosure helps) • Oil capacity ≈ 2.8 gal (10.6 L) • Coolant capacity ≈ 1.85 gal (7 L) • Easy service side access: oil filter, fuel filter, pre-filter/water separator all on one side for quick oil changes Build & Features • Weather-resistant powder-coated steel enclosure (white over black base in the video) • Includes battery, residential muffler, and basic fuel tank on standard configs • Options: silenced weather enclosure, block heater, oil pan heater, battery charger, larger tanks, 3-phase voltages available • Dimensions (enclosed approx.): 57” L × 33” W × 44” H • Shipping weight roughly 1,250–1,400 lbs depending on config • Warranty: 5-year comprehensive factory warranty (engine has its own Perkins coverage); lifetime customer support from Aurora • Emissions: U.S. EPA T4i Stationary & CARB compliant (no aftertreatment needed on this model) Why These Slap Perkins reliability + Mecc Alte clean power + DynaGen smart controls = rock-solid whole-home or light commercial backup that can also run continuous if needed. Super serviceable layout (everything you need for routine maintenance is right there on the access side). Diesel efficiency means way lower fuel burn than propane or gas equivalents for the same power. Perfect for off-grid, whole-house standby, farms, shops, or anywhere you need real power that just works. These two are heading out the door after final cleanup and crating. Drop this in your TikTok caption or voiceover — short punchy version works great too: “20 kW Aurora Perkins diesels ready to ship. 1800 RPM 4-cyl Perkins, Mecc Alte brushless, DynaGen controller, 200A transfer switches. Clean power, 500-hr oil changes, built to last 20k+ hours. Whole-home beasts.”#guyanesetiktok🇬🇾 #Gridlinktrading #fyp #goviral #viral