Original caption
Never add more monomer to an acrylic bead once it is on the nail. Your liquid-to-powder ratio needs to be correct when you pick up that bead, rather than changed afterward by adding more liquid to keep working it or smooth it out. As Doug Schoon explains, the liquid and powder are formulated to work together in the correct proportions. The powder contains the initiator, benzoyl peroxide, and the liquid contains the catalyst that helps activate it. These ingredients work together to start the chemical reaction that turns the liquid monomer into solid polymer. When you add more liquid to the bead, you are introducing more monomer without the corresponding amount of powder. This throws off the balance and can interfere with proper curing, leaving excessive unreacted monomers in the coating. Too much liquid also increases shrinkage during curing, which creates stress where the acrylic meets the natural nail. This can lead to lifting, weakness, cracking and premature service breakdown. What concerns me even more is what happens to those unreacted monomers afterward. They can be present in the dust created when you file the acrylic, and they can also be released into the removal liquid when the coating is soaked off. This creates additional opportunities for skin exposure, irritation and allergic reactions. An incorrect mix ratio is much more than a problem with how well your acrylic wears. Your monomer-filled brush should never touch your client’s skin either. I see nail technicians carefully keeping their acrylic bead away from the skin while allowing their wet brush to touch the cuticle area, sidewalls and surrounding skin. Keeping the bead off the skin accomplishes very little if you are transferring liquid monomer onto it with your brush. Please stop using your application brush to clean around the nail, sweep along the sidewalls or tidy up underneath the free edge if that means touching the skin. Even when there is no visible acrylic on the brush, it still contains monomer. You may think you are cleaning up the area, but you are actually leaving reactive chemicals on your client’s skin. Remember, your client does not have to experience redness, itching or irritation immediately for repeated exposure to become a problem. Allergic sensitization can develop over time, and someone who has worn acrylic nails for years without a reaction can still develop an allergy. Every unnecessary exposure is one we should be trying to prevent. Brush size matters too. An oversized brush can hold excessive liquid, making it harder to control your mix ratio and easier to accidentally touch the surrounding skin. Learn to control how much monomer your brush holds and practise picking up a properly balanced bead. Your acrylic should be workable without being excessively wet, and it should hold its shape without liquid running into the surrounding skin. A bead that is too dry can create problems as well, so getting the correct balance is important. I know some of these techniques have been taught and practised for years. I also know that changing habits after doing something the same way for so long takes effort. However, once we understand how these products work and what causes unnecessary exposure, we have a responsibility to make those changes. I would much rather see nail technicians improve their application techniques today than have them or their clients deal with an allergic reaction tomorrow. Proper product control is about protecting your health and your client’s health, not just creating a beautiful set of nails. #NailSafety #AcrylicNails #NailTechEducation #NailProductAllergies #HealthyNailsCollaborative