Hook
Stop Using The Oven Self-Clean Button IMMEDIATELY Before This Happens! Because if this gets on the stainless steel, it's going to etch. Now again, because it's so powerful, it does the job a little bit quicker, but those are just a few things to keep in mind. When it comes to using any oven cleaner, and this kind of just applies for really cleaning everything, is you always want to let your cleaner have time to work. But especially, it seems like oven cleaners really need a little extra time. And plus, like I mentioned before, I'm trying to save energy and time, so spray it down evenly across the entire oven and just let it do its thing. Now the bottle here says 10 minutes. I usually recommend anywhere from 30 minutes to an hour if you can, just because again, it's going to emulsify all of that grease and grime, making it so much easier to wipe away. Now a question I get all the time is what do I do around the heating element here? Now what I like to do is just simply lift it up very gently. You don't want to damage it. And then we're going to spray underneath. Make sure to get the bottom of the oven here as best as possible, because usually this is where all the grease and grime likes to sit. Now if you do happen to get any oven cleaner on the actual heating element itself, that's okay. I just recommend using a damp towel, clean that really good to remove it, and rinse it off the surface. So as we wait for the cleaner to do its thing, if you come in close here to this oven, you'll notice there is a self-clean function. Now anytime I do an oven cleaning video or talk about cleaning ovens, I always get a comment, "Brandon, just use the self-clean." Now I don't recommend it because really any appliance repair person I've ever talked to says not to use it because it can damage the oven itself, and it's a really big fire hazard to use. It actually will heat up to almost 800 degrees to burn off all the grease and grime, and in doing so, that can melt things like fuses, internal components. I've even seen the control panel get wonky and melt on some of the plastic ones. So really, it's better just to clean it yourself than take the risk and use that option. So now that the cleaner has broken down all the grease and grime and had time to work, I just grab some damp microfiber towels and wipe and rinse everything down. Now one note, if you do like to use towels like me, it's always a good idea to do a section, then give the towel a real good rinse. Continually rinsing them will help them stay in better shape. Now when you're cleaning your oven, it can kind of be a little bit of a back-breaking job just because it's so hard to reach inside.