Step by step walk through: How to use the Liene Pixcut Sticker Maker

Oh my gosh, I need a whole tutorial and I need you to show me all the equipment that I need. I wanna know how to do this, but I wanna show you how to do this on the iPad and all the software. You do not need to be tech savvy to make your very own stickers with this sticker machine. Start by plugging in your machine and holding down on the power button until it turns on. Then go to your App Store and look up the Liene app. It's completely free. You're gonna want to download and open that. Once you're in the app, click on that very top corner to add and connect your machine. This is what it's gonna look like when you add a new printer. You can do it either through the app or through your settings. I usually do it through my settings. You're gonna go to your Bluetooth and find where it says Liene Pixcut S1-0357. If it's your first time doing this, it'll be at the bottom. Once you see it's connected, you can go back to the Liene app. The status should change from offline to standby. Now we want to make sure that we have everything on the machine ready to go. There's gonna be a cassette in the very top section right here. And this is where you're gonna want to load your sticker or your photo paper. Make sure that the text is facing down and then load it right into the cassette. The smaller part of the cassette is going to go inside of the machine just like this. You will load your ink cartridge on the other side by opening up the little door and sticking it in. It fits perfectly like a puzzle piece, super easy to do. And now we're ready to print. The Liene app comes with thousands of free templates that you can print out. If you find one that you like, click on it and then click where it says edit on canvas. It will load right into your canvas for you and all you have to do is click make it. It's super easy. You don't need to change anything on it if you don't want to. Or if you want to upload your own photos, click canvas at the top. Select create new and click the upload button on the very bottom right. All the images that you upload will live right here in this gallery. And of course, you can add more if you want by clicking upload images. Often times I will go on Pinterest and find a cute collage. You'll click on the three dots on the very top right hand side and then click download image. And then upload it to the Liene app. At the bottom, you can click on templates, elements, line, AI, shapes, upload. If you want to move the images around, you can click on image split. I'm using it directly, so all of the images stay together. And then I just drag the corner of the photo to make it bigger on the canvas. If you're happy with the size, click make it on the top right. It's going to take you to the screen where it shows you what the border is going to look like. Notice how there's a blue line around just the hearts on the bottom right, but there's a blue line that goes around a bunch of the other images. We want to fix that by clicking border. This is going to tell the machine where we want it to cut. We want to bring the border lines down enough that it cuts around each individual image. Instead of one giant sticker. If you like the layout of these stickers, you can click on use it directly. Or if you want to move the images, you can click on image split. I'm using it directly, so all of the images stay together. And then I just drag the corner of the photo to make it bigger on the canvas. If you're happy with the size, click make it on the top right. It's going to take you to the screen where it shows you what the border is going to look like. Notice how there's a blue line around just the hearts on the bottom right, but there's a blue line that goes around a bunch of the other images. We want to fix that by clicking border. This is going to tell the machine where we want it to cut. We want to bring the border lines down enough that it cuts around each individual image. In other words, we want a blue line around each individual image. If you want to have a little white border around the stickers, you can make the border smaller. Or if you want to cut to make the stickers cut directly around the image with no white border, you can make the border smaller around zero or one. Once you're happy with your border, all we need to do is click cut on the bottom right. The machine will take care of the rest. It's going to go in and out of the printer for different color printing one color at a time. Printing magenta, printing cyan, printing yellow, printing black. Finally, it gets laminated before it pushes through the other side of the machine to get cut. This black piece is magnetic. If you want to take it off, you can get a better look at it actually cutting out your stickers. This is the most satisfying part of the process. You get to watch your stickers start to come to life. Once it's done, the machine will push out your new sticker sheet and you are all done. I absolutely love how simple this machine is to use. It's incredibly easy to get the hang of and the quality of the stickers are incredible. They are waterproof and they won't fade over time like a lot of other printers tend to. Let me know if you have any other questions about this machine in the comments. And if you want to grab one for yourself, I will link it for you below. Happy sticker making. Bye.