depending which valve you have. If you remove the top from this valve, there's actually a built-in valve core remover tool for Schrader valves. But for Presta valve, I used my multi tool to remove the core. And with the air removed, we can take the seal off our bottle of Slime and check that out. It really is like gooey Slime. Then screw the lid back on and peel back the label to access this short bit of tube they supply. We need to remove the cap and push the pipe over the nozzle like this. It says in the instructions to fill the tube up with the valve facing slightly uphill, so I slid the tube on and started giving it a squeeze. But the tube isn't a very good fit on the valve stem and instead of going inside, the Slime went around the side. It's obviously been designed for a slightly larger diameter Schrader valve. So to install it here, I wiped all of it off clean. Then wrapped a bit of insulation tape around to increase the diameter. So now when I push the tube on, it's a nice snug fit and this time when I squeezed the bottle, you can see the Slime going inside. Ha, that's a lot better. There's a guide for how much you should install for each tire. And for this one, you need half a bottle each. If you're at the right level, you can remove the tube. I had to unwind the tape, give it a little clean off, then refit the valve. Next up, we need to attach our pump and inflate the tire again. Close up the valve, refit the cap, then finally spin the tire to distribute the Slime evenly around the inner tube. And that's done. Just don't forget to do the front wheel too. And for this one, I found I didn't even have to bother wrapping it in tape. I just wound a bit of this paper around to increase the diameter. And that made a seal. It's nice and easy. But how does it actually work? I'm going to test it on this inner tube. The Slime's inside ready and I'm going to puncture it with a pin. Wow, look at that. A tiny bit of the Slime has come through, but it sealed it instantly. I'm impressed. Let's try again. Here, exactly the same. And I guess if the tube is pushed up against the inside of the tire as well, it will probably work even better. But I want to try something bigger. This screwdriver is absolutely huge compared to the pin. It's about 3 millimeters in diameter. So I'm going to force it in through. And when I remove it, wow, look at that. A little bit of Slime did squirt out, but that really has sealed it. That's seriously impressive. Next up on our list is this. Kids light & SFX. It came on this card and includes 25 sound effects. They're listed here on the back. So I took it off the packaging and this is what we've got. You can see there's four buttons on the top. The lights at the front, the two rubber straps underneath and another bit at the back. Pull tab to connect the batteries. And it's ready to use. So this button at the front cycles through the different lighting effects, six different settings. And the up and down button here, you can cycle through all 25 sound effects. As well as the bell. There's also all sorts of things like a police siren, a fire engine, a motorbike, a helicopter, a fart, magic spell, a hooter, burp, wolf, elephant, horse, magic carpet, firework, truck, train, Klaxon, reversing beeper. What a great unit. And once you've selected your sound effect, this button plays it. And you can also select sound levels using this button here on the back. And the little button here, resets everything. It also comes with this, which is really cool. And I'll show you what it does in a second. But first, to attach it to your handlebars, just sit it on like this. Then the straps wrap around underneath and clip on the tab like this. So it really is quick and easy. And it feels nice and secure too. And you can also select three different sound levels using this button here on the back to adjust the volume. And the little button here, resets everything. It also comes with this, which is really cool. And I'll show you what it does in a second. But first, to attach it to your handlebars, just sit it on like this. Then the straps wrap around underneath and clip on the tab like this. So it really is quick and easy. And it feels nice and secure too.