Using the screwdriver, I'm gonna lift up that sprinkler head. Once I have the stem extended, I'll use the vice grips to lock the stem into place. We're gonna unscrew the spray head and also remove the internal filter and set those aside. We're gonna grab the riser, screw that riser onto the stem itself. Slide that cap at the topper over the top. Then we're gonna reinstall the stem and also remove the internal filter and set those aside. It's important to put that cap at the topper on, otherwise it will not fit. Now we're gonna grab the topper, pull it up, release our vice grips. Push down on the cap at the topper and that's gonna snap that on. That's how quick and easy it is to install the cap at riser. You can see that the sprinkler head is now level with the concrete and is about three inches below the tops of the blades of grass. I don't mow my lawn that short anyway, so I shouldn't have to worry about mowing over these heads. Let's go ahead and install a couple more. This head is seriously overgrown, so I need to use my spade to make sure there's enough room on the sides of the sprinkler to snap that cap at riser. I'll slightly dig around the edges to make sure there's enough room. And then I'll extend the stem and use my vice grips to lock it into place. I'll unscrew the spray nozzle and remove it and the internal filter. Next, I'll screw on the riser extension, slide on the cap at the top mount, and then reinstall the filter and spray nozzle. And really, that's as fast and as painless as this process is. I'm extremely impressed with how easy this was. Let's take a look at how this actually affects the sprinkler height. As you can see, the sprinkler head is still slightly below the surface, so I won't have to worry about tripping on it or mowing over it. I cut my lawn to three and a half inches prior to this install, but let's extend the stem and see how much taller that is now. And whoa, raising it by an inch and a half is gonna ensure that the water clears the grass near the sprinkler heads. This elevation is crucial because it eliminates the frustration of water being blocked or trapped by taller grass near the sprinkler heads. Previously, uneven distribution meant dry spots and some areas and oversaturated ones. Now, water reaches further and more uniformly, which is vital to promoting consistent growth and health across the entire lawn. One thing I didn't notice was that despite the added height, there has been no noticeable drop in water pressure. The system maintains strong, consistent water flow, which is essential for effective watering. This efficient pressure management system means that every part of the lawn receives the right amount of water without any waste. Previously, uneven distribution meant dry spots and some areas and oversaturated ones. Now, water reaches further and more uniformly, which is vital to promoting consistent growth and health across the entire lawn. One thing I didn't notice was that despite the added height, there has been no noticeable drop in water pressure. The system maintains strong, consistent water flow, which is essential for effective watering. This efficient pressure management system means that every part of the lawn receives the right amount of water without any waste.