Can you actually make money doing basic woodworking these days? I mean, the cost of this hobby doesn't feel like it's getting any cheaper. And yet, every other woodworking video seems to be about an item they can't keep in stock or converting a 2x4 into a better hourly rate than most lawyers. So if you're eyeing your garage, wondering whether the tools and the wood could actually pay for themselves, this one's for you. I've tried to make money doing this three different ways. One of them almost worked. I'll walk you through what actually happened and give you some tips on how to save time and money. But most importantly, I'm going to build a couple of these get-rich-quick projects myself, try to sell them, and give you an honest verdict. No hype, just the math. I started with a decor stool, which can be made from a single 8-foot 2x4. I got this idea from Bearded Viking who is an awesome creator. And let me be very clear, none of this is meant to attack any of these people. Daniel seems like an unbelievable dude and they all make incredible content for their intended audience. There are less than 10 total cuts to make, but I felt like it was only fair to build the project once without rushing, so I could find where the time sucks were, and then see if I could do anything to remove the bottlenecks. The first one I found was using CA glue to act as clamps while the actual wood glue dries. That way you can keep working instead of waiting around. Measuring and marking screw locations is always a slow process too. I know that from experience, so I made a template to duplicate the locations much faster. After completing one stool at my own pace, I entered full-on production mode, turned the camera off, and batched out three stools as quickly as I could. I was humming, and it ended up taking 1 hour and 45 minutes total to cut, build, and stain these. I didn't apply a top coat. I also got lazy on the last one and did a fake shou sugi ban finish, which looks like absolute trash if you ask me, but I don't know, people like it. Let's talk economics. The wood costs $4.55 per item. Add in $1.28 for screws, $1.12 for plugs to cover said screws, and I'm rounding down here a bit, but another $1 for glue, sandpaper use, and stain. That brings your total materials cost to $7.95. There are no labor rates because that's a rabbit hole I don't want to go down right now, and the profit is essentially your labor if you're doing this for fun on the side. Bearded Viking suggested selling this for $45, and that's what I listed it for on Facebook Marketplace under my own name, not Lincoln Street, to keep this fair. And if I can sell all three, that's $63.51 an hour. I'll let you know how much I was actually able to get later on. One of the first projects I ever batched out and sold were squirrel picnic tables. Fun, cute, and the absurdity made them sell like hotcakes. But like this stool, they live in this weird space of being small, but not small enough to ship at a reasonable price. And the hypothetical Etsy customer ends up paying around 50% of the item cost in freight, which is a major turnoff for sales. Your best bet is Facebook Marketplace, in person, word of mouth, craft shows, etc. Unfortunately, that cuts off an entire sales channel and hundreds of thousands of potential customers. So if you're going to sell something small, make sure you can actually ship it for a reasonable price first. I got bored of selling picnic tables for cute rats real fast, and the local market also dried up, so I moved on to furniture next and sold lots and lots of chairs. I tried to follow that same path for this video and tackled an entry bench from Who's the Boss next. I'd only watched one or two of his other videos before, but I really like this guy and all his plans are free, which led to a really funny story I'll tell you about in a moment. This can be made from a single 2x10x8. And like the decor stool, I built one going slow, looking for ways to save time based on my own experience. Unfortunately, there really isn't much you can do here. If you were serious, maybe a big jig for aligning the pieces during the assembly, but that's not going to make a meaningful difference. I did use pre-cut plugs to fill the screw holes on this build and the stool. In bulk, they're about 7 cents a piece. The alternative is buying a plug cutter and making your own, which is very time-consuming, or cutting a dowel. I learned this building chairs because each one had over 40 holes to fill. And spending a little extra on the pre-cut plugs actually comes out much cheaper in the long run because of all the time you save on the labor side. That's something to keep in mind as you venture down this road. For the time trial, I only made one piece because you're not going to save a lot of minutes batching benches in my experience, and my kid had a baseball game. And in the Who's the Boss video, he said you could knock one out in 30 minutes. I want you to pause this video right now and guess how long you think it took me to build one as fast as I could without hurting myself. Did you do it? Okay, it took exactly one hour to cut, build, and stain. This did not account for the extra 20 minutes I spent spraying lacquer the next day after the stain had dried. So an hour and 20 minutes, being generous. And that is not meant to attack anyone. This is a widespread issue that plagues most woodworkers, including myself, early on. No one accurately accounts for how long something takes to create or complete a task ever. We're perennial underestimators. When I was batching out the first order of 15 chairs back in the day, it took me three and a half times longer than I budgeted. Keep in mind for the beginner woodworkers watching this, it's likely that your setup looks nothing like mine and isn't optimized to build as quickly as possible. This is a fully outfitted workshop because I do this for a living. Most of you likely don't even have a dedicated space, so you're going to be spending time setting up tools and breaking them down after to get the car back in the garage. The clock is ticking while all of that is happening. Hey, quick sidebar, for the last four years you guys have been begging me to bring these t-shirts back. I get weekly emails letting me know it's their favorite shirt and they want more. Well, I have heard your cries and we're going to start selling them again. There's a QR code on screen, there's a link in the description. We have some new colors and some new designs. They're going to start shipping in November, but you can place orders right now. I would do it sooner rather than later so that they don't sell out because once they're gone, they're gone and you'll probably have to wait another four years. All right, back to it. The real question is how many Ferraris can future John buy selling benches? The wood was 14.16, 90 cents for screws, 70 cents for the plugs, $1.25 for glue, sandpaper use, and stain, again, rounding down there, plus another $3.23 for lacquer. That brings our total to $20.24. Who's the Boss said he was getting too many orders at $65, which is a hell of a problem to have, so he raised his price to 85. And now, the funny story and the byproduct of making awesome videos with free plans like he does. I saw at least seven other postings on Marketplace for the exact same bench, ranging anywhere from $80 to 165. And it was clear some people never even built the bench, they just took screenshots from his YouTube video and then they posted those. So naturally, like the gangly, gumby gangster I am, I undercut the shit out of all of them. $65, time to make some money. Three quick points before the final build. First, keep in mind none of these videos claiming you can make XYZ dollars off of a single board ever account for anything going wrong. This is woodworking. You will make mistakes, cans of lacquer will misfire like it did on my bench, which meant going back and fixing it. You will ruin a board here or there. This is not a utopia where everything goes perfectly. Additionally, if you start selling online...