This is what your mouse cursor looks like if you rotate it so it points straight up. First of all, it looks completely wrong. And second, if you use Windows, straightening it out exposes a dirty little secret. The right wing is fatter than the left, and the tail isn't even attached to the middle. You are looking at the most stared at icon in human history, and the only reason it leans to the left is because of a hardware problem from 1973 that doesn't even exist anymore. Back in 1968, when the very first computer mouse was demonstrated on a stage in San Francisco, the cursor on the screen actually pointed straight up, which makes total sense. If you ask a normal person to draw an arrow, that's how they draw it. That straight arrow only lasted five years. By 1973, engineers at Xerox built a brand new computer called the Xerox Alto, the very first machine with a modern desktop screen. It had this tall portrait style monitor packing 606 by 808 pixels. For 1973, that screen looked like magic. There was just one catch. It was a one-bit display. Every single pixel on the screen had to be either pure black or pure white. There were no shades of grey to soften rough edges. And because computer memory was ridiculously expensive, the hardware only gave the mouse cursor a tiny 16 by 16 grid of squares to live inside. Try drawing that original straight up arrow inside a 16 by 16 checkerboard, and you run into two problems. First, 16 is an even number, so there's no middle column to put a sharp single pixel tip. And second, on a square grid, drawing two angled sides turns both wings of your arrow into chunky, jagged staircases. So the computer scientist at Xerox who sat down to draw the cursor, a guy named Alan Kay, came up with a brilliant workaround. He shoved the tip of the arrow into the top left square, pixel 0,0. That let the left side of the arrow drop straight down the edge of the grid with zero jagged pixels, while the right side stepped down at a clean 45 degree diagonal, one square over, one square down. Problem solved, right? Well, almost. Because fixing the tip of the arrow created a brand new problem for the bottom half. Think about the angles for a second. The left edge sits at 0 degrees, and the right edge slants at 45 degrees, which means the center line splitting your arrow in half sits right in the middle at 22.5 degrees. And while a square pixel grid loves 45 degree lines, you can't draw a clean 22.5 degree tail on a 16 by 16 grid. The tail had to be rounded to the nearest whole pixel, one square over for every two squares down, which permanently knocked the bottom half of the cursor off center.