This is an RGB matrix board.

@mewtru

186.6K followers · usually 51.7K views a post

Views

2.2M

Likes

281.7K

Comments

1.3K

12.2K

Why it worked

The video succeeds by combining a high-interest DIY tech project with a clear, step-by-step tutorial format that feels accessible to hobbyists.

Summary

The creator demonstrates how to build a DIY Spotify album art display using a Raspberry Pi and an RGB matrix board. She walks through the hardware assembly and explains the code required to sync the display with her Spotify account.

Structure

1Introduction to the RGB matrix board
2Hardware assembly with Raspberry Pi
3Wiring the power and data cables
4Explanation of the code logic
5Demonstration of the finished display
6Future plans for a custom frame

On-screen text

THIS IS AN RGB MATRIX BOARD and this is an empty spot on my wall that fits this board almost perfectly SO LETS MAKE SOMETHING WITH THIS my plan is that I'm gonna display a spinning CD version of whatever song is playing and it's gonna just use the album art of that song first thing we have here is an RGB matrix bonnet for the Raspberry Pi I soldered this part right here together and then also pin four and 18 together what you're gonna do is your Raspberry Pi Zero and you're gonna take your bonnet and you're just going to slide that in like that and there you go the box the matrix came in came in with some wires so we're gonna take the red side of it and put it into the positive side so you just stick it in like that and you screw it tight sweet, now that's not gonna move and then you take the black side and you put it into the negative side and just make sure they're secure so now take your matrix and then flip it over and here you can see VCC and ground and then you're gonna connect the other end of that wire to this so this is the other end you're gonna take one of these and connect it to here and then make sure the red lines up with VCC and then you're gonna take this other cable that came with it and put that into here and then the other side of this goes into this part of the bonnet and that's the hardware setup now we just got to write the code so the code is a little complicated because I first had to get it to work with Spotify and authenticate my token and then I had to get like a library that handles the RGB stuff on the matrix but the code it works so here's all that now let's just run it so here I basically ssh into my Raspberry Pi and I run the script and let me show you what this looks like I've been obsessed with this album the new Olivia Rodrigo album that came out so let me play it on Spotify and then here's how it looks like when it's playing and then this is what it would look like on the wall this is literally the coolest thing ever it looks so good in person there's no none of this like flickering that you see on the camera the back is kind of messy the electronics are just kind of out and there's a wire connecting it to the wall and outlet so I just need to build a frame around this and then keep it all nice and tidy up there so come back for part two

Original caption

Here’s how to make a fun Spotify music display using a raspberry pi! #raspberrypi #cyberdeck #hardware #electronics #DIY

More from @mewtru

Their other posts in the index, biggest breakout first.

Transcript

This is an RGB matrix board. And this is an empty spot on my wall that fits this board almost perfectly. So let's make something with this. My plan is that I'm gonna display a spinning CD version of whatever song is playing and it's gonna just use the album art of that song. First thing we have here is an RGB matrix bonnet for the Raspberry Pi. I soldered this part right here together and then also pin four and 18 together. What you're gonna do is you're gonna take your Raspberry Pi Zero and you're gonna take your bonnet and you're just going to slide that in like that and there you go. The box the matrix came in came in with some wires. So we're gonna take the red side of it and put it into the positive side. So you just stick it in like that and you screw it tight. Sweet, now that's not gonna move. And then you take the black side and you put it into the negative side and just make sure they're secure. So now take your matrix and then flip it over and here you can see VCC and ground and then you're gonna connect the other end of that wire to this. So this is the other end, you're gonna take one of these and connect it to here and then make sure the red lines up with VCC. And then you're gonna take this other cable that came with it and put that into here and then the other side of this goes into this part of the bonnet. And that's the hardware setup. Now we just got to write the code. So the code is a little complicated because I first had to get it to work with Spotify and authenticate my token and then I had to get like a library that handles the RGB stuff on the matrix. But the code it works, so here's all that. Now let's just run it. So here I basically SSH into my Raspberry Pi and I run the script and let me show you what this looks like. I've been obsessed with this album, the new Olivia Rodrigo album that came out, so let me play it on Spotify and then here's how it looks like when it's playing. And then this is what it would look like on the wall. This is literally the coolest thing ever. It looks so good in person. There's no none of this like flickering that you see on the camera. The back is kind of messy, like the electronics are just kind of out and there's a wire connecting it to the wall and outlet. So I just need to build a frame around this and then keep it all nice and tidy up there. So come back for part two.