this 2 minute routine

@littleprintyco

31.6K followers · usually 22.8K views a post

Views

172.9K

Likes

4.5K

Comments

59

Shares

1.6K

SoundTikTok sound · Summer Vlog

Promoted product

LittlePrintyCo

Your new dose of 3D print cuteness

Why it worked

The video provides a practical, quick, and visually demonstrated solution to a common problem in 3D printing (failed prints), making it highly relatable and shareable for the target audience.

Summary

The video demonstrates a daily routine for maintaining 3D printer build plates to prevent failed prints. It shows cleaning the textured build plates with dish soap and a sponge, then wiping them with 90% isopropyl alcohol before each print to ensure good adhesion and quality.

Structure

1Introduce the routine for failed print prevention
2Wash textured build plates with dish soap
3Wipe plates with alcohol before printing
4Show successful prints on clean plates
5

Original caption

@littleprintyco A clean build plate is one of the easiest ways to prevent failed 3D prints! Every day, we wash our textured build plates with dish soap using a sponge reserved just for our printers. Before every new print, we wipe the plate with 90% isopropyl alcohol to remove fingerprints and dust. It only takes a couple of minutes, but it helps improve adhesion and keeps our prints looking their best. Do you clean your build plate before every print? #3dprinting #smallbusinessowner #3dprint #3d #youngentrepreneur

More from @littleprintyco

Product placement

LittlePrintyCo (ACTS - this is the brand name of the 3D printing business, and the video demonstrates their process and products. Removing it would change what happens in the video). Cassetta (APPEARS - This is the brand name of the 3D printer visible in the video. Removing it would not change what happens in the video). 90% isopropyl alcohol (ACTS - used to clean the build plate. Removing it would change the process shown in the video). Dish soap (ACTS - used to wash the build plate. Removing it would change the process shown in the video). Sponge (ACTS - used to wash the build plate. Removing it would change the process shown in the video). Paper towel (ACTS - used to dry the build plate. Removing it would change the process shown in the video).

On-screen text

this 2 minute routine saves us hours of failed prints so ONCE A DAY PLATES USING JUST PRINTERS OUR TEXTURED PLATES HELP STICK WELL BUT DIRT FINGERPRINTS CAN STOP THAT FROM BEFORE PRINT WE 90% ALCOHOL CLEAN BUILD PLATE PRINTS IT'S HABIT BUT MAKES A BIG DIFFERENCE